Azimuthal wave number control of oscillatory thermocapillary convection in a liquid bridge

Thermocapillary convection in a half‐zone liquid bridge of high Prandtl number fluid is widely known to exhibit a three‐dimensional oscillatory flow after the onset of oscillation. The oscillatory flow presents ‘standing’ and ‘traveling’ flows depending upon the temperature difference between the top and bottom rods. In the oscillatory state, the flow shows a modal structure with an azimuthal wave number that depends on the aspect ratio of the liquid bridge and the intensity of the thermocapillarity expressed by the Marangoni number. The present study attempted to control the azimuthal wave number by heating the free surface locally with a prescribed frequency and intensity. The flow in the liquid bridge exhibited different modal structures depending on the heating conditions and a relationship between the frequency and the modal structure was obtained. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 34(7): 460–469, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20086     

Photocatalytic hydrogenation of acetophenone derivatives and diaryl ketones on polycrystalline titanium dioxide

In the absence of molecular oxygen, various aromatic ketones such as acetophenone derivatives and diaryl ketones were photocatalytically hydrogenated on polycrystalline titanium dioxide (Degussa P25) under UV light irradiation (> 340 nm). The desired secondary alcohols were obtained with excellent chemical efficiency (almost 100% yields for 10 examples) by choosing ethanol as a sacrificial hole scavenger, which was oxidized into acetaldehyde.     

Antioxidative activities of some peptides isolated from hydrolyzed potato protein extract

Three peptides (5A, 5C and 6C), purified from potato protein hydrolysate fractions, possessed antioxidative activities. Isolation and purification were carried out using gel permeation chromatography and successive reverse-phase HPLC. These three peptide fractions were sequenced and identified as Phe-Gly-Glu-Arg, Phe-Asp-Arg-Arg and Phe-Gly-Glu-Arg-Arg, respectively. The fractions 5A, 5C and 6C inhibited linoleic acid oxidation by 55.3%, 58.5% and 61.7% using β-carotene decolorization assay system, while the inhibition ratio was 32.1%, 93.0% and 93.4% in the ferric thiocyanate assay system, respectively. The peptide fractions 5A, 5C and 6C also repressed lipid oxidation by 24.2%, 14.7% and 26.4% in the erythrocyte membrane ghost assay system, respectively. Oral administration of 100 mg/kg of body weight of the chemically synthesized peptides, 5A, 5C and 6C to rats (male Wistar) 30 min prior to ethanol injection reduced ethanol-induced gastric mucosal damage by 67.9%, 57.0% and 60.3%, respectively. Conclusively, these peptides have shown real potent antioxidative activities and could further be investigated for potential use as food additives.     

Preparation of Yttria-Stabilized Zirconia Thin Films on Strontium-Doped LaMnO3 Cathode Substrates via Electrophoretic Deposition for Solid Oxide Fuel Cells

A yttria-stabilized zirconia (YSZ) thin film on an La_0.8Sr_0.2MnO₃ porous cathode substrate was prepared, using electrophoretic deposition (EPD) to fabricate a solid oxide fuel cell (SOFC). The electrical conductivity of an La_0.8Sr_0.2MnO₃ substrate is satisfactorily high at room temperature; therefore, YSZ powder could be deposited electrophoretically onto an La_0.8Sr_0.2MnO₃ substrate without any extra surface treatment, such as a metal coating. Successive repetition of EPD and sintering was required to obtain a film without gas leakage, because of the thermal expansion coefficient mismatch between the YSZ and the La_0.8Sr_0.2MnO₃ substrate. On the other hand, the electromotive force of the oxygen concentration in the cell that used YSZ film prepared via EPD increased and attained the theoretical value when the number of deposition and calcination cycles was increased. Six or more successive repetitions were required to obtain a YSZ film without gas leakage. A planar-type SOFC was fabricated, using nickel as the anode and YSZ film (∼10 μm thick) that had been deposited onto the La_0.8Sr_0.2MnO₃ substrate as the electrolyte and cathode. The cell exhibited an open circuit voltage of 1.0 V and a maximum power density of 1.5 W/cm². Thus, the EPD method could be used as a colloidal process to prepare YSZ thin-film electrolytes for SOFCs.     

Fast Labelling of Natural Scenes Using Enhanced Knowledge

A new technique for labelling natural scenes is proposed. This technique labels disjoint regions on an image of a natural scene on the basis of knowledge about the relationship among objects. The proposed technique consists of three stages: (1) segmentation, (2) initial labelling, and (3) label improvement. One of the most promising previous techniques uses simulated annealing to find the solution, while our technique uses local hill-climbing with enhanced knowledge for speeding up the processing. Local hill-climbing is known to be easy to be captured by a local minimum. We solved this problem by enhancing the knowledge being used as constraints for the search. Our knowledge represents 1-to-n relationships among regions, pair-wise relationships of regions, and relative locations of the regions to the image. In addition, we introduced two region features: an entropy in intensity; and a linearity of contours of each region. The linearity evaluation aims to distinguish artificial objects from natural objects. The validity of the technique is supported by some experiments. These experiments showed that the proposed technique is much faster with the almost same accurate.     

Forecasting electric power generation in a photovoltaic power system for an energy network

Recently, there has been an increase in concern about the global environment. Interest is growing in developing an energy network by which new energy systems such as photovoltaic and fuel cells generate power locally and electrical power and heat are controlled with a communication network. We developed the power generation forecast method for photovoltaic power systems in an energy network. The method makes use of weather information and regression analysis. We carried out forecasting power output of the photovoltaic power system installed in Expo 2005, Aichi Japan. As a result of comparing measurements with prediction values, the average prediction error per day was about 26% of the measured power. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 167(4): 16–23, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20755     

Temporal segmentation and assignment of successive actions in a long-term video

Temporal segmentation of successive actions in a long-term video sequence has been a long-standing problem in computer vision. In this paper, we exploit a novel learning-based framework. Given a video sequence, only a few characteristic frames are selected by the proposed selection algorithm, and then the likelihood to trained models is calculated in a pair-wise way, and finally segmentation is obtained as the optimal model sequence to realize the maximum likelihood. The average accuracy on IXMAS dataset reached to 80.5% at frame level, using only 16.5% of all frames in computation time of 1.57 s per video which has 1160 frames on the average.     

Dynamic finite element simulation of the gunshot injury to the human forehead protected by polyvinyl alcohol sponge

Although there are some traditional models of the gunshot wounds, there is still a need for more modeling analyses due to the difficulties related to the gunshot wounds to the forehead region of the human skull. In this study, the degree of damage as a consequence of penetrating head injuries due to gunshot wounds was determined using a preliminary finite element (FE) model of the human skull. In addition, the role of polyvinyl alcohol (PVA) sponge, which can be used as an alternative to reinforce the kinetic energy absorption capacity of bulletproof vest and helmet materials, to minimize the amount of skull injury due to penetrating processes was investigated through the FE model. Digital computed tomography along with magnetic resonance imaging data of the human head were employed to launch a three-dimensional (3D) FE model of the skull. Two geometrical shapes of projectiles (steel ball and bullet) were simulated for penetrating with an initial impact velocity of 734 m/s using nonlinear dynamic modeling code, namely LS-DYNA. The role of the damaged/distorted elements were removed during computation when the stress or strain reached their thresholds. The stress distributions in various parts of the forehead and sponge after injury were also computed. The results revealed the same amount of stress for both the steel ball and bullet after hitting the skull. The modeling results also indicated the time that steel ball takes to penetrate into the skull is lower than that of the bullet. In addition, more than 21 % of the steel ball’s kinetic energy was absorbed by the PVA sponge and, subsequently, injury sternness of the forehead was considerably minimized. The findings advise the application of the PVA sponge as a substitute strengthening material to be able to diminish the energy of impact as well as the load transmitted to the object.     

吲哚荷尔蒙自由基脉冲辐解光谱及其酸基平衡和还原电位性质研究

The Absorption spectral, acid-base equilibrium potential properties and formation and decay kinetics of four kinds of radicals from natural existing indole hormones were studied by pulse radiolysis.One of the most important properties for these four indolyl hormones, melatonin, 5-methoxygramine (MTA),5-methoxy-N, N-dimethylthytrytamine (DMM TA) and 5-methoxy-N, N-diethylthytrytamine (DEMT A), which are involved in biochemical processes and play crucial roles in many neuropathy and cancer related diseases, is their facile one electron oxidation with formation of radical cations or their conjugated base, the indolyl radicals.Formation kinetics and properties of the radicals were investigated by pulse radiolysis using the Linac accelerator with fast time-resolving optical system in UTNL.In the present study, these radicals were generated through oxidation of the corresponding hormone with azide radical in radiation induced process. Their spectroscopic properties were investigated and it was found that the transient spectra in all these cases exhibit similar absorption and pH dependence: in acidic solution, the radicals are characterized with three absorption maxima around 320-350, 440-460, 520-550nm. The spectra of MTA at various pH were shown as an example. From the absorption changes as a function of pH, two pK values were determined to be around 5 and 9 for the indolyl radicals except for melatonin, in which, only one pK was distinguished to be 4.4. Formation kinetics of the radicals was measured by following the growth of their absorption peaks and it was found that these indolyl derivatives transfer an electron to N3, with different rate constants, i.e.1.2×1010, 4.5×109, 4.9×109, 1.6×109 dm3 mol-1 s-1 for melatonin, MTA, DMMTA, and DEMTA, respectively.Reduction potentials of the radicals vs their molecules were also determined and they are dependent on the pH of medium. At pH 7, the reduction potentials were estimated to be 1.10, 1.18, 1.18, 1.20eV for melatonin, MTA,DMMTA and DEMTA, respectively. Because of its relatively high contents in human brain cells, melatonin is the main antioxidant among hormones against the oxidizing species in brain cells.